DC-DC Converter MP1584EN - max 3A - 12V- micro 2 grams - Step-Down - for FPV

DC-DC converter MP1584EN - max 3A - 12V

Inverter that changes voltages from 4.5V to 28V - to 12V voltage. The circuit works only as a voltage reducer.

This device allows you to safely stable power FPV electronics (cameras, etc.) on a stabilized constant voltage (e.g. 12V), in case the input supply is greater than the output voltage + 1.5V

Technical data:

• Input voltage : 4.5-28V
• Output voltage: 12V
• Output current: max 2A constant (for 12V output) or 1.5-2A (for 5V output), Max 3A (with heatsink), heatsink must be installed when power is more than 15W. (The heat sink is not in this unit)
• Efficiency: Max 96%
• Frequency: 150kHz
• Minimum voltage difference: 1.5V (voltage is lower than input voltage)
• Operating temperature: -40 ? up to +85 ? (power in 10W)
• Output ripple: <30mv span="">
• Short circuit protection: No
• Size: 22x17x4 mm
• Weight: 2g
• Datasheet - technical data

Notes:

• Incorrect connection of power supply polarity causes damage to the inverter - warranty will not be recognized
• This device is for experienced do-it-yourselfers, basic electronics knowledge and soldering skills are required. The company is not responsible for damages resulting from lack of soldering skills or poorly made electrical installations.
• Check the output voltage and adjust with the proper potentiometer and only then connect the receiving device