Voltmeter and ammeter 0-100V - 50A - 0.28' Red/Red - in case

Voltmeter and ammeter 0-100V - 50A

Universal panel meter, digital voltmeter and ammeter 0-100V, 50A. Convenient way to make your own meter in your device. Version with red voltmeter and blue ammeter.

• A meter is a great thing to have when we need to have information on voltage or current, whether charging, powering motors, inverters, and more.
• These are basic energy values that are worth monitoring, and such a panel meter will make it easier for us to do so. Data is displayed in an easy to read manner. Simply insert the meter into the cut-out hole and the teeth will snap into place and provide a secure fit.
• The meter also has two potentiometers for adjusting current and voltage values, so the device will very accurately taint the values of the.

Technical data

• Power supply voltage of the meter: DC 4.5V-30V
• Measurement:
  • 0-50A DC current via external shunt
  • voltages 0-99.9V DC
• Size of digits: LED 0.28"
• Number of voltage and current digits: 3
• Display of voltage values to tenths: e.g. 0.5V / 50.5V
• Display of current values to hundredths of a part: e.g. 0.05A / 50.5A
• Color of the digits: red
• Refresh rate 500ms/1measurement
• Measurement accuracy: 1%
• Operating temperature -10* to 65*C
• Dimensions 48x29x26mm
• Mounting hole dimensions: 46x26.5 mm
• Bacon to be purchased separately: Current shunt 50A - 75mV - for voltmeter and ammeter

Caution when first attempting to start up, meter calibration is required. To do this, connect the shunt and the power wires to the meter without connecting any receiver. Next, momentarily short-circuit (e.g. with tweezers) the two solder points located on the back of the meter in the upper left corner described as "ZERO"

Connections:

• red thin - power supply to the meter (max 30V)
• black thin - power ground GND
• yellow thin - voltage measurement. When powered up to 30V, can be connected to thin red. When supplying more than 30V, isolate and connect only to the receiver.

Included

• Voltmeter and ammeter 0-100V - 50A - 0.28" in case - 1pc.

No shunt included