EPOXY Quick Star adhesive 5 minutes 2x10ml - epoxy resin

EPOXY Quick Star adhesive 4 minutes 2x10ml - epoxy resin

Very good and strong two-component epoxy adhesive. Just right for bonding metals, glass, cardboard, concrete, stone, wood, marble, felt, porcelain, ceramics, cork, plastic and as a filler for cavities such as holes in plastic. The dried binder can be drilled and sanded. The adhesive is resistant to water, most chemicals and cleaning agents, and is non-flammable.

Destinations

• metals
• glass
• cardboard
• concrete
• stone
• wood
• marble
• felt
• porcelain
• ceramics
• plug
• plastics
• as a filling of cavities, such as holes in plastic.

Directions for use

1. The surface to be glued must first be cleaned and degreased.
2. Open the tubes and pierce with the tip of the cap. Squeeze the right amount from both tubes (glue and hardener) in equal proportions and mix well with the included spatula until the ingredients are perfectly combined. Squeeze out only as much glue as you need for immediate use.
3. Apply the mixture with a spatula to the glued surface, join the glued parts. If necessary, remove excess glue.
4. The mass solidifies within 3-4 minutes of preparation. To make the glue completely bind the glued surfaces, leave the whole thing for approx. 30 minutes.

NOTE!

The glue is very strong. In case of skin contact, immediately wash with soap and water. Keep away from children.

Included

• tube of glue (resin) A 10ml
• tube of hardener B 10ml
• mixing spatula